These floor risers help lift the handlebars off the floor when your bicycle is sitting upside down. This prevents damage to the floor from bar ends, stops the handlebars from sliding, and prevents accessories such as lights from being crushed.

These floor risers are designed to be used when your bicycle is being worked on, cleaned or simply stored away.

The built-in loops on each riser mean that they simply hang off each grip, and remain hanging as you tip the bicycle over - no more guessing where to place them on the ground and trying to lower your bike onto them!

The risers lift the handlebars up by 38mm, and feature rubber-like feet to prevent sliding.

They are designed to fit onto standard flat bar / mountain bike handle bars and grips. They will not fit onto drop bar / road bike handlebars, however the loop can be cut off and the risers can be placed on the ground by hand.

Designed and 3d printed in South Australia from premium quality PETG. 

Please note that the 3d printing process differs greatly from other manufacturing processes that you may be familiar with. This specialised, low volume manufacturing process may result in small imperfections on the surface throughout the product. This is completely normal, and rest assured that each product has been cleaned and inspected before being packed and sent.

Available colours: Gloss Yellow

Shipped in a kraft paper pocket, inside a cardboard parcel box with padding.

Weight: 49 grams each.

Size: 70mm dia. x 57mm H (Printed Body)

Includes: 2x Risers + Instructions

**IMPORTANT INFORMATION**

This product is designed as an accessory add-on for bicycles only. Being used in a manner other than stated on these instructions may result in malfunction or damage.

Always make sure that the floor is level, flat and clear of any loose objects. After placing the bicycle upside down, double check each riser to ensure that they are sitting flat with the handlebars sitting level in the groove. The front end of the bicycle should not rock or slide.